New! 1200W Helios Wi-Fi Remote Controllable Infrared Bar Heater Energy Efficient, Low Maintenance

All new units in stock now!  The product will be delivered within 2 days after dispatch.

Product Features

•  

  Natural IR Heat

•  

  Energy Efficient

•  

  Low Maintenance

•  

  DIY Installation

•  

  No Heat Wastage

   

  Specs Table
  

  More Information

  Wattage 1200w Wi-Fi Yes Manufacturer Mirrorstone Surface Material Aluminium Surface Temperature 200-300°C Dimensions (mm) 900mm x 150mm x 63mm Recommended Fixing Wall/Ceiling Frame Colour None IP Rating IP44 - Protected against splashes of water Voltage 230V Warranty 2 Years Upgradable to 5 Years Panel Weight 4kg Product Features Wi-Fi connectivity to the Smart Life app Heating Element Aluminium

   

  Product Description

  Trust In Genuine Mirrorstone Products

  When purchasing any product from us, you can rest assured that you’re buying authentic Mirrorstone products, that have been stringently tested to meet quality standards.

  This is why you should be wary of purchasing lower quality products, which might put you or your home at risk.

  Add some clean, efficient heat to wherever needs it, whether that be the home, office, garden office or warehouse. An infrared bar heater is bound to be the answer for any of your heating problems. Want to spend less, be kinder to the environment, or have a better-looking heater? The answer is here. This bar heater measures approximately 900mm by 150mm, and has a power output of 1200w. This is enough to heat an area of around 18m²! It measures just 63mm in depth, so is unlikely to stick out too much when mounted on either the wall or the ceiling.

  Made from premium aluminium, you don’t need to worry about this heater not looking great throughout its lengthy lifespan. It can reach a surface temperature of around 200-300˚C, although this won’t be too much of an issue. Despite it being hotter than a traditional radiator, it can actually be installed much further up the wall, so it’s well out of reach of any prying fingers.

  It comes with an IP44 rating, meaning that it’s well protected from any accidental splashes of water. However, if it’s installed outside, then we do recommend that is under cover, to protect it against any particularly heavy rain.  Please note, this heater is not for an open outside area.  It can be installed in an enclosed space, covered at least from three side. 

  Please note that the advised heated areas are for guidance only. For a more accurate heated area that is more relevant to your home, please speak to one of our Customer Services advisors about your room.

  What is Infrared Heating?

  Infrared heating is a fairly new technology that completely changes how you heat your surroundings, both in its methods, and its convenience. It is far more efficient than traditional heating methods, as it heats the objects in the room, including you, rather than just the air around it. As the surface area of the objects is less than the volume of air, it uses less energy in doing so. It can actually save you around 60% on your heating bills!

  It does this by firing infrared beams around the room, which bounce off of the objects, leaving them warmed. This avoids the convectional currents that conventional heaters produce. This is where the warm air rises, cools, and falls again, requiring more heat. Infrared heating doesn’t cause this, so there won’t be any dust circulation, mould growth, or cold spots with infrared heating. This makes infrared heating better for your health.

  Infrared heating is completely safe, so there’s no need to worry. It’s the same technology that TV remote controls, airport security, and laser quest games use! It provides the same sort of heat that the sun does, and even our own bodies emit infrared radiation. There’s no nasty UV radiation with infrared technology, however.

   Smart Control With Integrated Wi-Fi

  This particular bar heater now comes with a Wi-Fi module integrated into its thermostat, granting you access to its settings from anywhere in the world! Simply download the Smart Life app on your iOS or Android device, connect the app using the instructions provided in the manual, and off you go! From here, you can set multiple on/off times, hourly timer settings, zone control and family sharing!

  Remote Control

  

  With this heater, you’re in luck. It’s fully remote controllable, and the IR signal remote control is included in the box already! It is so simple to use, and it makes the bar heater even more versatile than it already is. It’s slim, it looks good, and it makes your life a lot easier.

  You can adjust the temperature of the bar heater with just a simple press of a button, whether you want an extra kick of heat, or you’re starting to get a little too warm.

  You can switch the display on or off, if you want a more incognito approach to keeping your surroundings warm.

  You can also set a sleep timer on the heater, if you wish for it to stay on for a certain amount of hours.

  The Helpful Screen

  

  With the LED screen that comes with these infrared bar heaters, you can find out quite a lot of information.

  It is situated on the right hand side of the panel, providing you’ve got it the right way around. If not, you might be wondering why the screen is upside-down…

  The screen lets you know what your target temperature is, so you know what the heater is trying to reach.

  There’s a helpful blue graphic above this, which lets you know whether the heater is actively emitting heat in order to reach this temperature, too. It also helps you when you’re setting the sleep timer.

  Easy to Install

  

  Slide the brackets with the threading into the slots in the back of the bar heater, and fix them into place using the wing nuts provided. Then, screw the non-threaded brackets into the wall where you wish to  mount your heater. Using the wing nuts provided, fix the two sets of brackets together at the angle you wish to have your bar heater pointing.

  You can forget about getting any professional assistance in for these heaters – they’re super easy to install.

  You won’t need to get in touch with plumbers, carpenters, or electricians, as these are a do-it-yourself, one-person job. They are completely plug-and-play compatible, so there’s no real work to do, outside of actually mounting the heater.

  It’s very easy to do, and completely straightforward. All you have to do is drill into the wall, and then you’re ready. Just screw in the two rear-mounted brackets, and you’re good to go!

  The brackets are adjustable, too, so you can direct the heat at specific angles. It only takes a few minutes before it’s up and running.