This product is delivered within 2-4 working days

Latest Samsung led chips incorporated in a stylish Aluminium case.
Easy to fit with just basic electrical knowledge, 5 years warranty.
Luxury Sensor Light. Perfect for gardens, driveways etc.

50W LED Floodlight with PIR Sensor, SMD Samsung Chip

Olectrical presents a new range of motion sensor outdoor lights with manual override that incorporate security functionalities. Our 50W LED Floodlight with PIR is made using high-quality Samsung LED and low energy light-emitting diodes. The black led floodlight gives high-intensity illumination at a fraction of the cost, as well as electricity consumption of traditional technologies such as halogen floodlights. As with all LED lights, black PIR floodlight’s brightness is most accurately measured in Lumens, rather than Watts. So, this garden sensor lights will give out 4000 Lumens while consuming only 50W, offering considerable energy savings. In addition, our motion-activated garden sensor light will turn on when they sense movement, making them ideal for protecting property against intruders. Alternatively, you can use the manual override option to keep it on when needed.

Product benefits

Applications

V-Tac PIR sensor floodlights are widely used for security lighting purpose for residential, commercial or industrial areas. Therefore, our PIR floodlights will make a perfect choice for Facade lighting, Lobby area, Garages, Walkways, Parking Lots etc.

Installation guide

V-Tac’s PIR sensor floodlights are now easier to install with just basic knowledge. For best results, please follow the steps below:

1. Choose your location to fix the sensor floodlight.
2. Use the PIR garden light bracket to mark the position of the fixing holes.
3. Drill the fixing holes, and fix the floodlight into position.
4. Connect the mains lead from the 50W PIR LED Floodlight to our Waterproof terminal box and ensure that the correct polarities for Live, Earth and Neutral are observed i.e.
   • Connect the green/yellow earth wire to the earth terminal ‘E’.
   • Then, connect the brown live wire to the live terminal ‘L’.
   • Finally, connect the blue neutral wire to the neutral terminal ‘N’.
5. After wiring, check that there are no bare wires, all the wires have been correctly connected and that the cable restraint has been tightened.
6. Switch on the electricity to check that floodlight illuminates. Additionally, you can adjust the angle of the led security floodlight so that it illuminates the required area.
7. Finally, tighten the floodlight brackets and you are all set up!

Manual Override Option.

• To override the PIR mode, switch the garden sensor light on for 10 seconds. Next, switch it off and back on, very quickly. As a result, the unit will now stay on until it is manually switched off.
• To return the unit back to PIR mode, switch the floodlight off for 10 seconds and then back on. Again, the floodlight is now back in PIR mode.

Browse our range of PIR LED security floodlights today!

V-Tac outdoor PIR floodlights  come in a variety of versions in terms of:

• Power Consumption – 10W, 20W, 30W, and 50W;
• Light Colour Temperature – Warm White, Day White and Cool White;
• Body Colour – White and Black Body colours available.

ADDITIONAL INFORMATION